Rosalind Luctece Cosplay (on hold)

What should you try to draft for the first time when you have little to no drafting experience?

If you said a Jacket, that was the wrong answer. I know, because that's what I did.

Drafting is the complex and rewarding but very tedious way of making patterns when you can't find a paper fashion pattern in the shape you want. I'm used to using McCalls, Butternick and Simplicity patterns and I've drafted one or two things before, but usually from guides online, never from the dreaded bodice block.

Image from Laura After Midnight who has much more detail on drafting bodice blocks. Original image from Metric Pattern Cutting by Winifred Aldrich.

Once you have your bodice block tailored to you, then you can manipulate it. In this case I wanted to make the jacked and waistcoat Rosalind Lutece wears in Bioshock Infinite. 

Concept art by Claire Hummel (Shoomlah)

With drafting, it is incredibly important you do a mock-up to test the fit and make sure that everything looks right. Jackets are actually very complicated because you do have to guess a little the size of the lapel, and the lapel and collar are separate but drafted off of each other so if you change the lapel, you change the collar too (the Cutter and Tailor forum as some really detailed bits about shaping collars and lapels if anyone else is a massive geek like me and is interested). 

I only did two mock ups of the jacket bodice in the end, being mostly happy with the shape and length (it was about an inch or two too short, so I just added it on to the final pattern and drew in sharpie where I wanted some accents and buttons to go to make sure I liked the look. This is a pretty good idea if you've never sewn an unlined jacket before (or a lined one for that matter) because there are a lot of fiddly parts like facings that it's best if you have some practice on before you try it with your final fabric. 

This is actually Jacket Mark 2, when I fixed all the issues with the sleeve

 The first time around the shoulder was too long, arm hole was a little too small and the sleeve was too small and FAR too short. I cut off about 2cm from the shoulder and then redrafted the sleeve. And then drafted it again. And then drafted. It. Again. Over all I redid that sleeve 7 times because I kept mucking up the measurements. 

Sleeves. Harder than you think

In the end I couldn't get the measurements to quite match up so I fudged it. I added a good 3 cm to the outer sleeve with and rounded the crown (top) a little more so that I knew the sleeve would DEFINITELY fit my arms, figuring I could gather the top of the sleeve if needed to make it fit. Success?

SUCCESS!

 It turned out that I did need to gather it in, but only a little so the sleeve had a little poof just as it connected with the top of the shoulder. Me:1, Jacket: 0.

 I then moved on to the waist coat. I copied the pattern for the jacket bodice, slimmed the lapel a little, changed the front darts so that there were two smaller darts on each side rather than one large one and shortened it dramatically with the plan of the bottom of the waist coat to just pass my waist. It came up a little short in the end, and while the fit was good I didn't like the lapel. It didn't have as much of a round neckline as I would have wanted and the shoulders were way to large.

Images from Past Patterns and A Tailor Made It

I shortened the shoulders, lengthened the hem a little, enlarged the arm holes and drafted a new lapel separate from the body of the waistcoat so it would have a bit more of a curve. I had planned then to go in search for fabric before I started drafting the skirt (which I plan to follow this tutorial) where I hit a massive road block. My initial idea had been to make the jacket, waistcoat and skirt all from linen, which was a popular Edwardian fabric. What I did not realise was that linen was £11per meter, and I was easily looking at 8 meters of fabric. Made worse, when I went and looked at some linen in my local fabric shop I realised quite how THIN linen was. It would probably still be suitable for the waistcoat but definitely not for the jacket or skirt. I got a few swatches of other fabrics but couldn't find anything  in a colour which remotely suited what I was looking for. As a result I've had to put the Lutece project on hold until either I have more money or until I find a fabric that I'm happy with. It's a real shame because I was really looking forward to cosplaying her and I was really excited to do her clothing in period fabric but for now it'll have to wait. I am looking into a wool fabric but am very concerned about it being way to warm and expensive. In the mean time at least the patterns are done :)

Persephone Cosplay

I came across this absolutely stunning dress by Lyrota which I've fallen completely in love with! It's really inspired me to do something on a similar vein for Glasgow Comic Con 2014, and Persephone is one of my absolute favourite goddesses. Please go check out Lyrota's work, it's absolutely stunning and she's talking about possibly selling a gown similar to her work in the future. 

Lyrota's Persephone dress

I began by draping a rectangular piece of cream chiffon over the mannequin (which I now regret and If I did it again I would create a v-shaped bodice), cut a slit for my head and then gathered the overhang together very tightly for the shoulders. I covered the gather with a wee bit of burgundy lace from the waist tie. I pinned and hand stitched some little gathers into the waist of the back to give it a little more shape

 After that I added flowers to the back, and then to the front, and then to the back again.

Back

Front

 The tree branches were made from this fantastic wire bark which I ended up having to order from the US. I absolutely loved it though. It was attached to the shoulder and then wound down the back and then around the waist. Then more flower petals were added. I bought 500 of them but probably only used about 400 which were all glued on with fabric glue.

Front

Back

 Then came the fun part. I really wanted to dip-dye the bottom of the fabric but knew that dye would never take to the chiffon which I was pretty sure was polyester, so I bought some acrylic ink, mixed it with a little water and put it in a spray bottle. After repeatedly spraying, letting it dry, and spraying both the top and a rectangular under layer of chiffon I was happy with the result (as well as having a very pink shower). I then glued about 200 flowers on to the bottom, which was a lot harder than it looks.

At long last! Finished

I then fashioned myself a crown out of some of the remaining tree bark wire and added some little wire berries that looked a bit like pomegranate seeds.

 I began hand beading this wonderful necklace pattern I found. I really wanted a big thick, heavy necklace which made people think of pomegranate seeds.

 And this was the final result!

Photo on the day from Alasdair Watson Photography

Incredibly quick Disney Spring Sprite cosplay

I'm sorry for being so quiet! I've been completely wrapped up in my first year of civil engineering which is why it's taken me so long to post anything.

For last year's MCM Expo scotland I was crazy busy with other things, but really wanted to cosplay something. Disney's Fantasia 2000 has been one of my favourite movies, and I still watch it every time I'm sick. My favourite character has to be the spring sprite.



I ended up some very cheap chiffon, and in an attempt to get the floaty shape I decided to go with a kimono style dress. Technically no pattern was used, I basically flung it on my mannaquin and hoped for the best.

I had about 9m of fabric, 6m in a light green, another 3m in a very dark green (and a sash of a mint green, left over from the chemise I did). I split the light green fabric into two sections of 3m, lay the light green over the dark green and then cut a slit for my head. At this point the fabric fell off my shoulders by quite a ways, so I hand gathered it until it sat nicely on my shoulders, exposing my arms.

.

I then stitched up either side, leaving enough space for my arms to poke out, and cut the remaining 3m of green fabric in half lengthways, stitched bottom and sides together to make sleeves

A bit of hemming, a wig, some accessories and some make up later I'm ready to go!

In total the costume only took me about 2-3 hours to make, so it's far from perfect but I don't think it was bad for something that was thrown together on a whim.