Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Friday, 12 September 2014

DIY Lolita: Mary Magdalene inspired/replica dress UPDATED

I have always loved Mary Magdalene  dresses. They have a really simple design that I love and a little while ago I completely fell in love with this style. Unfortunately, Mary Magdalene sizes are small even for Japanese lolitas, so I figured I'd try and make one for myself. DISCLAIMER: In general I'm not a fan of replicas and certainly not a fan of replica dresses being sold when they take business away from the original desiner. The reason I've made this for my own personal use is because I know I will never be in a position to wear on of Mary Magdalene's dresses for myself, and I want to use this simplistic cut for my own work. I ideally would like to get to a skill level where I could simply be "inspired" by this design, but at present I feel the finished article style is too close to the original for me NOT to call it a replica.

Going for something like this
Fabric and trim (didn't end up using the rickrack)
Firstly I used Anny's Princess Seamed Bodice Generator (available here) to make the bodice because I find usual princess seamed patterns don't really accommodate my shape. However, the generator only really helps you make the bodice, and doesn't tell you anything above the top bust, so I drew it out, stitched it together, then lay some calico under the bodice and drew in where I wanted the arm/shoulder parts to be.


I tried it on, and it was WAY too big. so I tailored it at the sides and front, and started laying out the new pattern on the fabric. To start I cut out the lining just to check I liked the shape, then laid the lining piece very carefully over the fabric, as I really wanted to make sure the stripes lined up correctly on the finished dress.
Lining on mannequin with a petticoat for shape

 I used a tutorial on Riley Blake Designs to make the scalloped edging on the neck and on the hems. The easiest way to do this is to cut a facing out of the same fabric, mark the scallops, stitch them together and cut them out as close to the stitching as you dare (about 0.5cm)

Also remember to measure the hem and divide evenly by the number of scallops you want. If I remember correctly there were 10 scallops on the front and 6 on the back.




 Once you've cut the excess flip them right way out and PRESS! This is incredibly time consuming but totally worth it.




The sleeves were a very simple capped sleeve tutorial which I sadly miscalculated my measurements, so while the sleeves fit they are a little bit small. Then I added the cream crochet trim to the neckline, sleeve ends and scalloped hem.


 All that was left was to hand gather (why do I do this to myself) 7 strips of 150mm dark green fabric to make the ruffles on the bottom. I didn't quite like the way it sat at the back, so I added some of the dark green fabric to make a sash and break up the shape a little.

Final touch was some pearls, and a straw hat and as many cream/pink/white roses as I could find (which was 7, as well as a little rose I made from scrap fabric)
Of course I blinked as the photo was taken!




Thursday, 26 June 2014

Box Pleated Blue Skirt (or what I did with the blue dress)

If you remember from a few posts ago I attempted to make a blue chiffon dress... that didn't work out so this is what I did with the fabric!

[photo complete]

It's a baisc rectangle skirt only this time I tried doing box pleats rather than gathering. The easier way to do this (I've found) is to start marking your skirt with however wide you want the please. If you want them to be 2 inches long (as I've done), then start marking two inches along the wrong side of the fabric.



Then, start folding. Fold so that the dot a 0" on the ruler is directly over the dot at 2", so you have about an inch going towards the right (pin in place). Do exactly the same on the other side going the opposite direction, so that the dot from 6" is directly over the dot at 4"
Now you should have a 2" long bit of fabric in front (kind of looking like a box) of your fabric strip. Now stitch it in place.



And very importantly IRON IT. That'll leave you with nice crisp edges. You don't have to iron it all the way down, just a few inches to make sure it has the sharp edge.


Now add a waistband and you're done!









Thursday, 13 June 2013

Rectangle skirt

A quick tutorial on how to make your own rectangle skirt. A lot of the options are left up to you, and please excuse the crude drawings.

First thing you need is a pattern.


Now, to tell you what that means. Here you have 3 rectangles of different sizes. The first rectangle should be a long, where a is pretty much as long as you like. This determines how much poof your skirt has. It can be anywhere for your hip size (and smaller and it wont fit) upwards, +2cm for seam allowance. I personally like to go for 2-3x waist size, so about 2m of fabric will do. b is the lenth of the skirt, again up to you. I personally like about 50cm.

The second rectangle is your waist band. c should be twice the width you want the waist band to be (I like 3cm) plus 1cm each side for seam allowance. d has a few more options. If you're going to have the skirt zip, then d should be your waist size (plus 2cm for seam). If you are going to have the waist band elasticated make d your hip size +5cm (2cm for seam and 3cm for ease), then cut elastic the size of your waist -2cm or so for a snug fit. If you're going to be fancy and have the waist band PART shirred or elasticated, make d the maximum size you want the waist to be and add 2cm seam for the zip.

The third rectangle is the ruffle. You can have as many ruffles as you like, and can position them anywhere you like. I like to have one ruffle, placed either right at the edge of the first rectangle or about 10cm up. e should be the width of the ruffle. If you are having it NOT attached to the very edge of the skirt make sure it's LONGER than however far you're placing it up the skirt (ie, if you are having it 10cm up, make sure it is LONGER than 10cm. 15 is probably best +1cm for hem). f is double to triple b, depending on how ruffly you want the ruffle to be. Again this is a very flexible pattern.

After this there is no end to embellishments you can put on. I was originally going to (and may still do) paint sea creatures on this fabric in fabric paint (star fish, coral, sea weed, etc) onto the example skirt below. However you could add embroidery, lace trim or ribbon to anywhere you want on the skirt. This can be used as a plain underskirt, or have a chiffon (or other fabric) layer on top. The options are pretty much limitless. It's all about what you want. 




Here's my example (the turquoise skirt)


Here a was 2.5m (so a little over 2.5x my waist size) and b was 50cm. c, which you can't really see sadly, was 125 cm (just over my hip size), d was 8 cm making it a 3cm elasticated waistband. e was 10cm and position 2cm above the bottom edge of the skirt. f I'm not 100% sure on the length, as I just gathered and gathered, then stitched it on until it fit, however I estimate about 4m. The fabric is a lovely soft turquoise linen blend that is going to be an absolute pain to iron :).